November 16, 2026
Key takeaways
  • CMMC adds verified cybersecurity to DFARS 252.204-7012 to protect controlled unclassified information and federal contract information.
  • Three cumulative levels: Foundational Level 1, Advanced Level 2, Expert Level 3, aligning controls to contractor risk and data sensitivity.
  • Most contractors handling CUI must achieve Level 2, which requires a third-party audit every three years and annual executive affirmation.
  • DoD contracts will require CMMC compliance prior to award, with exceptions for COTS products and purchases below the $10,000 micro-purchase threshold.

Last Updated on November 16, 2026

The Cybersecurity Maturity Model Certification (CMMC) standard from the US Department of War (DoW) will impact hundreds of thousands of organizations over the next several years.

CMMC defines three levels of cyber maturity. The level a business must achieve depends on what information it gets from the government. CMMC Level 1 is referred to as “foundational.” It mandates a minimum set of 15 information security controls that establish basic cyber hygiene practices to protect federal contract information (FCI).

Since every company with a federal contract has FCI, CMMC Level 1 or above (or an equivalent standard) could eventually apply to nearly every company doing business with the US government.

Does your business need to achieve CMMC Level 1 compliance? This article will help you decide.

Key takeaways

  • CMMC Level 1 mandates 15 basic cybersecurity practices to protect federal contract information (FCI) on a contractor’s systems.
  • CMMC Level 1 requires an annual self-assessment of compliance coupled with a senior executive’s affirmation of compliance.
  • CMMC Level 1 compliance is “pass/fail” with no provisions for Plans of Action & Milestones (POA&Ms).
  • Phase 1 of the CMMC rollout began on November 10, 2025, when the DFARS CMMC acquisition rule took effect. The DoW includes CMMC Level 1 requirements in solicitations and contracts. Only firms that have completed their CMMC Level 1 self-assessment and affirmation of compliance can compete for these contracts.
  • Your business needs to comply with CMMC Level 1 if: a) It appears in your contract; b) Your prime “flows down” the requirement because you are receiving FCI.

What is CMMC 2.0?

The CMMC 2.0 program/framework seeks to ensure that organizations across the DIB can adequately protect sensitive unclassified data that the government shares with its contractors, especially FCI and controlled unclassified information (CUI).

Key CMMC features include:

  • A three-tiered compliance model. CMMC requires contractors to implement progressively more advanced cybersecurity controls depending on the sensitivity of data involved in their contract. This includes requirements “flowdown” to protect data that flows down to subcontractors and vendors.
  • Audit requirements. CMMC Level 1 requires only a self-assessment with executive affirmation and does not entail a certification.
  • Contract-based implementation. Companies handling sensitive unclassified US government data will need to achieve certification at the contractually mandated CMMC level as a precondition for contract award.

CMMC assessment requirements will be implemented using a four-phase plan over three years, starting with self-assessments at CMMC Level 1 and CMMC Level 2. This incremental rollout will allow more time to train Certified Third-Party Assessment Organizations (C3PAOs) and for DIB orgs to meet the CMMC requirements.

What is CMMC Level 1?

CMMC Level 1 defines a “foundational” level of cybersecurity maturity. It focuses on basic cyber hygiene capabilities to protect FCI and other less sensitive data from the most common cyber threats. These controls are universally regarded as essential for any business in any industry to reduce what would otherwise be unacceptable cyber risk.

DIB orgs can demonstrate CMMC Level 1 compliance through an annual self-assessment accompanied by a senior executive’s attestation of compliance. Executive attestation is intended to stimulate greater management involvement in cybersecurity and ensure accurate self-reports. Penalties for misrepresentations of compliance can and do include contract cancellation and prosecution of both corporations and individuals under the False Claims Act.

CMMC Level 1 mandates 15 controls in 6 domains, as described in 48 CFR 52.204-21, Basic Safeguarding of Covered Contractor Information Systems. These 15 controls map to 17 controls in the NIST 800-171 cybersecurity standard, as covered here.

Important domains at CMMC Level 1 include Access Control, Identification and Authentication, and System and Information Integrity. To achieve compliance a company must show it meets all the requirements, as there are no allowances for POA&Ms or other remediation.

Unlike higher CMMC levels, Level 1 does not require firms to document their cybersecurity practices, such as in a system security plan (SSP). There is no requirement to assess process maturity at this level beyond basic risk management. Likewise, there is no third-party/C3PAO audit requirement for CMMC Level 1 compliance.

What is FCI?

FCI is defined in FAR clause 52.204-21 as “information, not intended for public release, that is provided by or generated for the Government under a contract to develop or deliver a product or service to the Government, excluding information provided by the Government to the public (such as that on public websites) or simple transactional information, such as that necessary to process payments.”

Examples of FCI include:

  • Contracts, proposals, and related agreements
  • Emails
  • Reports and charts
  • Process documentation
  • Financial data pertaining to program costs, budgets, etc.

CUI, in contrast, is “information the Government creates or possesses, or that an entity creates or possesses for or on behalf of the Government, that a law, regulation, or Government-wide policy requires or permits an agency to handle using safeguarding or dissemination controls.” Handling CUI requires a significantly more robust cybersecurity posture than FCI. CUI may also be subject to distribution controls, such as International Traffic in Arms Regulation (ITAR) export control requirements. For more information see the CUI Registry.

Does my business need to comply with CMMC Level 1?

CMMC Level 1 applies almost universally to DIB orgs of all sizes that handle FCI that is provided by or generated for the DoW in accordance with a contract to provide a product or service. This includes:

  • DIB SMBs and other subcontractors or vendors that receive FCI from a prime contractor.
  • Cloud service providers (CSPs) and other vendors that store, transmit, or otherwise handle FCI on behalf of a DIB contractor or subcontractor.

Commercial Off-the-Shelf (COTS) products are generally not required to comply with CMMC Level 1.

How can you tell if your business needs to comply with CMMC Level 1? Here are two top reasons:

  • It is specified in your government contract. Often this is through inclusion of FAR clause 52.204-21 in existing contracts.
  • Your prime contractor flows down the requirement. Most likely if your business has a contract through a DoW prime contractor like Boeing, Raytheon, or Huntington Ingalls, the prime will flow down a requirement to comply with CMMC Level 1 if not a higher CMMC level. The general rule is that contractors must validate that their subcontractors conform to the requirements that match their information, making a CMMC Level 1 self-assessment and affirmation in the DoW’s Supplier Performance Risk System (SPRS) a prerequisite for doing business in the DIB.

What do CMMC Level 1 self-assessments look like?

To comply with CMMC Level 1, a DIB org must conduct a self-assessment using the assessment objectives defined in the CMMC Assessment Guide for Level 1. Unlike a NIST 800-171 self-assessment, for example, there are no scoring calculations in SPRS for CMMC Level 1 self-assessments, the results are “MET” or “NOT MET,” with no POA&Ms permitted. DIB orgs can conduct Level 1 self-assessments as often as needed, and can leverage a consulting partner for that purpose as desired. The DoW requires new assessments anytime a supplier makes significant architectural or scope changes to its CMMC environment. This could include enlarging a network that carries FCI, or addressing a merger/acquisition through changes to in-scope IT systems. Operational changes alone do not automatically trigger a self-assessment. The annual executive affirmation required for CMMC Level 1 must state that:

  • The organization has fully implemented all the Level 1 controls within its CMMC assessment scope.
  • The organization plans to operate the controls in a manner that maintains compliance.
  • The Affirming Official is a senior representative who has responsibility for ensuring CMMC compliance.

For many SMBs in the US Defense Industrial Base (DIB), this is a business-critical challenge.

Even CMMC Level 1, so-called “Basic Cyber Hygiene”, mandates a more formal information security program than many SMBs have in place today.

Do we need a system security plan for CMMC Level 1?

If yours is among the countless businesses that need to demonstrate CMMC Level 1 compliance, what do you really need to do?

John Verry, Managing Director at CBIZ Cybersecurity, talks straight to business owners about that critical question on a recent special edition of The Virtual CISO Podcast.

“CMMC Level 1 is a really interesting beast to me,” shares John. “Because what the CMMC framework says you need to do and what I think is the best way to do that… differ.”

“For CMMC Level 1, you don’t need an SSP and you don’t need the associated policies,” John clarifies.

An SSP defines the information, FCI and/or CUI, that’s in scope for your CMMC environment. Your SSP also defines how that information flows to you, how it’s generated within your organization, who you’re sharing it with, and what systems, people and processes interact with that information. Further, your SSP describes how each of the controls your CMMC level requires you to implement actually protects the data that’s in scope.

“I would argue that the best way to achieve CMMC Level 1 is to develop an SSP, and within that SSP to document those policies, how you actually achieve those 15 practices, and how you evidence that.”

“Many times, I’m chatting with people now on the phone and they’re saying, ‘I looked at the standard and it says I don’t need that.’ And I’m, like, ‘Yeah, I know. But…’” reasons John. “As a business owner, this is Risk Management 101. If I can put a little more effort in, and be assured of success, I’m going to take it every time.”

One of the ways that SMBs in the DIB can cost-effectively accelerate the maturation of their cybersecurity and compliance programs is to leverage a cloud-based compliance management platform. Additionally, many such tools can be used to support multiple compliance objectives, not just CMMC.

When do we need to be ready for CMMC Level 1?

Phase 1 began on November 10, 2025, so CMMC Level 1 (Self) language can already appear in DoW contracts. As noted above, CMMC Level 1 compliance requires a yearly self-assessment and affirmation in SPRS prior to contract award. Therefore, DIB orgs that anticipate they will need to demonstrate CMMC Level 1 compliance should complete a self-assessment and submit the results to SPRS as soon as possible. Otherwise you may lose the opportunity to bid on upcoming contracts.

What’s next?

Need a playbook to get your business to CMMC Level 1 compliance in the most efficient and strategic manner?

To connect with a CMMC expert about your business and cybersecurity goals, contact CBIZ Pivot Point Security.

Back to Blog